New
Product Quotation Request
GTS
Series
The
GTS is a geared twin-screw positive displacement rotary
pump. Externally
lubricated timing gears and bearings combined with no
internal
metal-to-metal
contact enables the pumping of non-lubricating fluids as
well as aggressive media.

Click
here to download a printable brochure for
The GTS 2100 Series Medium Pressure Two Screw Pumps
Click
here to download a viewable brochure for
The GTS 2100 Series Medium Pressure Two Screw Pumps

Advantages:
-
Variable
Capacity -
Design
permits a wide pumping range per case size
-
Engineered
Construction - Insures
accurate assembly
-
Self-Priming
– Low NPSH Requirements -
Inlet
design insures maximum suction even after running dry
-
Controlled
Fluid Temperature -
Pumping
cavity has integral chamber for steam or hot oil heating
of viscous fluids on start-up
-
No
Cooling Required – High
efficiency timing gears and oversized lube oil reservoir
eliminate costly external cooling systems.
Specifications:
Series |
Flow
Range |
Maximum
Pressure
|
GTS |
GPM |
L/M |
PSI |
BAR |
GTS074 |
15-100 |
33-375 |
300 |
20 |
GTS133 |
50-750 |
190-2800 |
450 |
31 |
GTS170 |
100-1500 |
375-5700 |
600 |
41 |
GTS208 |
450-2700 |
1700-10,200 |
600 |
41 |
GTS268 |
1100-4000 |
4100-15,100 |
450 |
31 |
GTS400 |
2000-6000 |
7500-22,700 |
300 |
20 |
Typical
Applications:
-
Crude
Oil
-
Asphalts
and tars
-
Aromatic,
naphthenic and aliphatic intermediates
-
Fats,
oils, waxes and soaps
-
Molasses,
glycerol, glues,
-
Paints,
resins and polymers

Design:
The
basic pump design is double ended. The
fluid entering the inlet port is split into two equal
portions for the inlet end of each set of screws.
As the rotating screws
intermesh, transfer chambers are formed trapping and
conveying the fluid axially to the discharge chamber in the
center of the pump. It
is also possible to reverse direction of flow by reversing
the direction of rotation.

Options:
|